Fendock accessories

 

Other dock accessories

 

 

Fendock accessories

DELUXE

ALUMINUM DOCK LADDER
Sturdy 1 1/2" round painted aluminum tube with curved walk through grips, 4 steps, quick release mounting brackets included.

Check Pricelist

STANDARD

ALUMINUM DOCK LADDER
Sturdy 1 1/2" round painted aluminum tube with straight walk through grips, 4 steps, fixed mounting brackets included.

Check Pricelist


STANDARD WHEEL KIT

Slides into bottom of front leg posts, allowing one person to install or remove dock. Kit includes pair of pneumatic tires with rims and grease fitting. Should be greased Spring & Fall.

Check Pricelist



DELUXE WHEEL KIT

This wider wheel is made up of a composite rim. It is recommended on the 12' x 16' Deck.

Check Pricelist


FENDOCK BENCH

Manufactured from strong mill finish extruded aluminum with cedar seat and back supports. Attaches to Fendock rail. This 48" long bench includes all necessary hardware.

Check Pricelist

FLAG POLE

Fits into Fendock leg - 10'0" or 20'0" high.
1 1/2 diameter mill finish aluminum.

Check Pricelist

FENDOCK LEVELING KIT

A winch with nylon strap slips into the top of a Fendock leg. Allows you to adjust the height of your Fendock while standing on it.

Check Pricelist


MOORING WHIPS

Solid fiberglass rods mounted in marine cast aluminum bases. 5 Models to choose from. Holds boats weighing from 2,500 to 20,000 lbs away from dock, protecting both dock and boat from costly damage. Braided nylon mooring & whip lines included.

Check Pricelist

BOAT RACK

Made from 1 1/2” mill finish aluminum tube, these supports simply slide down the Fendock leg. This 30” wide rack provides a convenient place to hold a canoe or windsurfer. They swing out of the way when not in use.
Three models available: Single Rack, Double Rack & Triple Rack
(Double Rack shown)

Check Pricelist

 


FOLD DOWN CAST
ALUMINUM DOCK CLEATS

Available in 6” or 8”inch.
(Aluminum in colour)


VINYL FENDOCK BUMPER

These rugged bumpers are designed to be slid over the Fendock leg holder to protect both your boat and dock. You can add extra leg retainers with bumpers to the sides of your Fendock for extra protection.

Check Pricelist


FENDOCK
DOCK HINGES


WATERPROOF FIBERGLASS STORAGE BOX

Made from reinforced fiberglass, complete with locking hasp. Available in three sizes:
42" x 16" x 18" inch, 57" x 16" x 24" inch
and 86" x 19" x 18" inch.

Check Pricelist


HINGES AND SPREADER BAR

Makes seasonal installation and removal by one person very convenient. Hinges and spreader bar are available for those who wish to make their own hinging system.

Check Pricelist
 


ROLLTEC AWNING

This high quality Rolltec awning can be ordered for dock mounting or wall mounting. It is 10'0" wide and has a 6'9" projection. The angle of inclination can be easily adjusted during the awning installation. The fabric is 100% acrylic, Scotch Guard coated, resists mildew, fade and shrinkage. Other widths & projections available. Price on application.

Check Pricelist

 
20' BOAT ROLLER
(Protect your investment)
• 20' Aluminum Frame
• 1400 lb Winch
• 5 Sets of Rollers
• 25' Heavy Duty Winch Strap and Hook
• 10' Extension available

PWC, Sailboat Caddy
This lightweight aluminum caddy has adjustable carpeted bunks, telescopic adjustable length, and a hand ratchet winch with strap. Available with wide deluxe wheels, or narrow standard wheels. The caddy comes knocked down for shipping, and is easily assembled.

Check Pricelist

 
 

 

Other dock accessories

SINGLE “D”

Ensures peace of mind for any runabout or personal watercraft owner. Uses small corners, end plugs and connectors as seen in assembly illustration below. Install on any horizontal or vertical surface.
White only.
1004-F Packaged in 8 Ft. Lengths, 80 Ft. /Carton, Corners, End Plugs, Connectors and Stainless Steel Screws, sold separately.

Check Pricelist

DOUBLE “D”

Provides double the protection with two air-filled channels. Uses small corners, end plugs and connectors as seen in assembly illustration below. Easily installed horizontally or vertically on any dock or boat house. Requires 2 End Plugs or Connectors for each joint.
White only.
1002-F Packaged in 8 Ft. Lengths, 40 Ft. /Carton
Corners, End Plugs, Connectors and Stainless Steel Screws, sold separately.

Check Pricelist


SINGLE “P”

Easily installed on any horizontal or vertical surface. Large “P” section with large air volume provides excellent protection. Uses large corners, end plugs and connectors as seen in assembly illustration below.
White only.
1001-F Packaged in 8 Ft. Lengths, 32 Ft. /Carton, Corners, End Plugs, Connectors and Stainless Steel Screws, sold separately.

Check Pricelist

SMALL “P”

Perfect for small outboards or personal watercraft. Will retain resiliency and brilliance for years. Can be installed in minutes.
1081-F White, Packaged in 8' lengths, 24 Ft. /Carton, Corners, End Plugs, Connectors and Stainless Steel Screws, sold separately.

Check Pricelist

Illustration depicting “Bumper” assembly.


PVC SOLVENT, Clear

Ideal for cementing all Corners, End Plugs and Connectors to AIR CUSHIONª Profiles to create the AIR CUSHIONª System.
May be subject to shipping restrictions.
1051-F 4 Fluid oz. (125 ml) c/w Applicator *

Check Pricelist


MOUNTING & ASSEMBLY SCREWS

Stainless steel will prevent unsightly staining caused by rusting of regular steel fasteners, and will last a life time. Use part # 1005 for mounting dock bumpers Use part # 1345 for assembling wood deck sections for your Fendock.

Check Pricelist


LIFE RING BUOY 24" WHITE

Roto-molded for strength with a polyethylene shell and filled with a closed cellular foam. It is approved by the USCG and the Canadian Department of Transport. The ring bodies are warranted for 7 years and are resistant to fire, oil and gas.

Check Pricelist


AIR CUSHION™ CORNERS

Connect AIR CUSHIONª Profiles at any outside
90 degree angle corner. Use with Connectors, End Plugs and PVC solvent for AIR CUSHIONª System.

1048-F Large Corner Packaged in 2 Piece Bag*

1049-F Small Corner Packaged in 4 Piece Bag*


AIR CUSHION™ CONNECTORS

Connect AIR CUSHIONª Profiles. Use with End Plugs, Corners and PVC solvent for AIR CUSHIONª System.

1028-F Large Connector Packaged in 2 Piece Bag *


1029-F Small Connector Packaged in 4 Piece Bag *

* Complete with Header Card

.


AIR CUSHION™
END PLUGS

Seal AIR CUSHIONª Profile ends. Use with Connectors, Corners and PVC solvent for AIR CUSHIONª System.

1026-F Large End Plug Packaged
in 2 Piece Bag*


1027-F Small End Plug Packaged
in 4 Piece Bag*


INFLATABLE DOCK WHEEL

Smooth rolling wheel offers substantial dock cushening and feature molded-in valves to adjust the level of firmness. It comes with hot dipped galvanized hardware mount. 9" and 12" diameter wheels available.


CORNER BUMPER

This air-filled bumper is constructed from nylon reinforced vinyl and features a built-in air valve for inflation or deflation.

Check Pricelist


CENTER HOLE BOAT FENDERS

Manufactured from the best quality marine grade vinyl resulting in superior strength & cushening. Fenders resist deterioration from mildew, gas, oil, seawater and bacteria and have built in ultra violet inhibitors. All fenders include an inflation valve to allow adjustment for the desired level of firmness.
Available in 4 sizes.

6" x 15"
8" x 20"
10" x 25"
12" x 34"

Check Pricelist